PDK41302-2*0.2+1SMF Tethered Drone Cable with Single-Mode Fibre
Tethered Drone Cables · Tethered Systems
Tethered drone cable with two 0.2mm² silver-plated copper conductors for 750 VDC power and one single-mode fibre for video and signal, 8.7 g/m.
Technical data
Full specification
Adjustable per project; the confirmed specification sheet governs.
| Model | PDK41302 |
|---|---|
| Specification | 2 × 0.2mm² + 1 single-mode fibre |
| Conductor | Silver-plated copper |
| Insulation | Composite material |
| Jacket | High-strength aramid fibre |
| Outer diameter | 2.5 ± 0.2 mm |
| Weight | 8.7 ± 0.3 g/m |
| Current rating | 1–3 A |
| DC resistance | 89 Ω/km |
| Voltage | 750–1000 VDC |
| Temperature range | -55 °C to +150 °C |
Product introduction
PAIDE supplies durable, lightweight hybrid cable solutions for tethered drones, allowing the aircraft to fly higher, see further and do more than before.
The cable contains 2 conductors that carry a continuous current of 1–3 A at 750 VDC, plus one single-mode fibre for video and signal transmission.
Model: PDK41302-2*0.2+1SMF
Cable construction:
- 2 cores, 0.2mm²
- 1 single-mode fibre
Insulation material: composite material
Conductor: silver-plated copper
Jacket: high-strength aramid fibre
Outer jacket colour: black
Temperature range: -55 to +150 °C
Outer diameter: 2.5 ± 0.2 mm
Weight: 8.7 ± 0.3 g/m
Current rating: 1–3 A
DC resistance: 89 Ω/km
Voltage rating: 750–1000 VDC
Properties: good environmental tolerance, resistant to salt spray, heat and humidity, temperature extremes, low pressure, UV and rain.
If this does not meet your requirements, contact us and we will provide a new design free of charge.
We will supply a tethered drone cable with a good cost-performance ratio.
